TechniSat Tareo 32 User Manual

- 32 -
Cable connections
NOTE: When connecting a device via the Side AV input, you have to use the supplied connection cables
to enable connection.See the illustrations above. | To enable PC audio, you will need to use the supplied SIDE
AV CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the
TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser
mode, output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend
that you plug all your cables into the back of the TV before mounting on the wall. | Insert or remove the CI module
only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings.
You can use the VGA input for connecting a YPbPr device. To do this, you need a YPbPr to PC cable (Not supplied).
AV Connection
Cable (supplied)
Scart
socket
(back)
VGA
Connection
(back)
Audio output digital
(S/P D/F electrical)
(side)
PC Audio Cable
(Not supplied)
Side Audio/Video
Connection Cable
(Supplied)
HDMI
Input
(back)
SPDIFF
Connection
(back)
SPDIFF
Side AV
Connection
(side)
Headphone
output
(side)
USB
port
(side)
Connector Type Cables Device
HEADPHONE
Common
Interface
(side)
CAM
module
SIDE AV
(Not supplied)
(Not supplied)
(Not supplied)
(Not supplied)
(Not supplied)
(Not supplied)
SIDE AV
YPbPr
MODE
o
SIDE AV
YPbPr
MODE
o
SIDE A
V
YPbPr
MODE
o
YPBPR
YPbPr Video
Connection
(side)
YPbPr Connection
Cable (supplied)
(Not supplied)
YPbPr Audio
output digital
SIDE AV
YPbPr
MODE
o

TechniSat Tareo 32 Specifications

General

Brand	TechniSat
Model	Tareo 32
Category	TV
Language	English