TechniSat Tareo 32

- 39 -
Settings Menu Contents
Conditional Access
Controlsconditionalaccessmoduleswhenavailable.
Language
Congureslanguagesettings.
Parental
Conguresparentalsettings.
Timers
Sets timers for selected programmes.
Recording
Conguration
Displaysrecordingcongurationmenu.
Date/Time
Sets date and time.
Sources
Enables or disables selected source options.
Satellite Settings
Displays satellite settings.
Other Settings: Displays other setting options of the TV set:
Menu Timeout
Changestimeoutdurationformenuscreens.
Scan Encrypted
When this setting is on, search process will locate the encrypted channels as
well. If it is set as Off, encrypted channels will not be located in automatic search
or manual search.
Blue Background
Activates or deactivates blue background system when the signal is weak
or absent.
Software Upgrade
Displays application version.
Hard of Hearing
If the broadcaster enables any special signal concerning the audio, you can
set this setting as On to receive such signals.
Audio Description
Audio description refers to an additional narration track for blind and visually
impaired viewers of visual media, including television and movies. You can
use this feature, only if the broadcaster supports that additional narration track.
Auto TV Off
You can set the timeout value of auto off feature.After the timeout value is
reached and the Tv is not operated for selected time , the TV will go off.
Menu Features and Functions
Biss Key
Biss is a satellite signal scrambling system that is used for some broadcasts. If
you need to enter BISS key on a broadcast, you can use Biss Key setting located
in the Other Settings menu. Highlight Biss Key and press OK to enter keys on
the desired broadcast.
Standby Search
(optional)
If you change Standby Search to Off, this function will be unavailable. To use
Standby search please make sure that you select Standby Search as On. If
the Standby Search is set to On, when the TV is in standby mode, available
broadcasts will be searched. If the TV locates any new or missing broadcasts,
a menu screen will be displayed, asking you whether or not to execute these
changes.Channellistwillbeupdatedandchangedafterthisprocess.Please
activate Standby Search setting in order to enable your TV for automatically
updating the broadcast frequency of thebroadcaster, broadcastdenition
and similar changes.
Install and Retune Menu Contents
Automatic Channel
Scan (Retune)
Displays automatic tuning options.
Digital Aerial: Searches and stores aerial DVB stations.
Digital Cable: Searches and stores cable DVB stations.
Analogue: Searches and stores analogue stations.
Digital Aerial & Analogue: Searches and stores aerial DVB and analogue
stations.
Digital Cable & Analogue: Searches and stores cable DVB and analogue
stations.
Satellite: Searches and stores satellite stations.
Manual Channel
Scan
This feature can be used for direct broadcast entry.
Network Channel
Scan
Searches for the linked channels in the broadcast system.
Analogue Fine Tune
Youcanusethissettingfornetuninganaloguechannels.Thisfeatureis
not available if no analogue channels are stored.
First Time
Installation
Deletes all stored channels and settings, resets TV to factory settings and
startsrst time installation.You can follow the instructions inthe Initial
Installation section for more information on this process.