TechniSat Tareo 32 User Manual

- 37 -
Menu Features and Functions
Picture Menu Settings
Mode
Foryourviewingrequirements,youcansettherelatedmodeoption.Picturemode
can be set to one of these options: Cinema,Game,Dynamic and Natural.
Contrast Sets the lightness and darkness values of the screen.
Brightness Sets the brightness value for the screen.
Sharpness Sets the sharpness value for the objects displayed on the screen.
Colour Sets the colour value, adjusting the colors.
Power Save
Mode
 To set PowerSave Mode asEco, Picture Offand Disabled. See the section,
“EnvironmentalInformation”inthismanualforfurtherinformationonPowerSave
Mode.
Backlight
(optional)
This setting controls the backlight level and it can be set to Auto, Maximum,
Minimum and Eco Mode. Backlight function will be inactive if Power Save Mode
is set to On. Backlight cannot be activated in VGA, Media Browser mode or while
the picture mode is set to Game.
Noise
Reduction
If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting
to reduce the noise amount. Noise Reduction can be set to one of these options:
Low, Medium, High or Off.
Advanced Settings
Dynamic
Contrast
You can change contrast rate by using dynamic contrast function. Dynamic
contrast can be set to one of these options: Low, Medium, High or Off.
Colour Temp Sets the desired colour tone.
Picture Zoom SetsthepicturesizetoAuto,16:9,Subtitle,14:9,14:9Zoom,4:3orCinema.
HDMI True
Black(optional)
WhilewatchingfromHDMIsource,thisfeaturewillbevisibleinthePictureSettings
menu. You can use this feature to enhance blackness in the picture.
Film Mode
(optional)
Films are recorded at a different number of frames per second to normal television
programmes.Turnthisfeature on when you arewatching lms to see thefast
motion scenes clearly.
Skin Tone Adjust the desired skin tone.
Colour Shift Adjust the desired colour tone.
RGB Gain
PressOKbuttontoeditRGBgain.Youcancongurethecolourtemperaturevalues
using the RGB Gain feature.
Reset Resets the picture settings to factory default settings.
Autoposition
(in PC mode)
Automaticallyoptimizesthedisplay.PressOK to optimize.
H Position (in
PC mode)
This item shifts the image horizontally to right hand side or left hand side of the screen.
V Position (in
PC mode)
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock (in
PC mode)
DotClockadjustmentscorrecttheinterferencethatappearasverticalbandingin
dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase (in PC
mode)
Depending on the resolution and scan frequency that you input to the TV set, you
may see a hazy or noisy picture on the screen. In such a case you can use this item
to get a clear picture by trial and error method.
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added
to the Picture Settings while in PC mode.

TechniSat Tareo 32 Specifications

General

Brand	TechniSat
Model	Tareo 32
Category	TV
Language	English