- 34 -
PressOK button on the remote control to continue and
the following message will be displayed on the screen.
You must select a search type to search and store
broadcasts from the desired source.
Aerial Installation
If you select AERIAL option from the Search Type
screen, the television will search for digital terrestrial
TV broadcasts.
NOTE: Press the menu button to cancel.
Afteralltheavailablestationsarestored,theChannel
List will be displayed on the screen. If you like the sort
channels,accordingtotheLCN(*),pleaseselect“Yes”
and then press OK.
PressOK button to quit channel list and watch TV.
(*) LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel sequence.
Cable Installation
If you select CABLE option and press OK button on
the remote control to continue, the following message
will be displayed on the screen:
To continue please select YES and press OK. To
cancel the automatic channel scan, select NO and
press OK.
You can select frequency ranges from this screen.
Use the up/down arrow keys.
You can enter the frequency range manually by using
the numeric buttons on the remote control.
Set Start and Stop Frequency as desired by using
numeric buttons on the remote control.
After this operation, you can set Search Step as 8000
KHz or 1000 KHz.
If you select 1000 KHz, the TV will perform the search
process in a detailed way. Searching duration will
the search process thus increase accordingly. When
nished,pressOK button to start automatic search.
The TV will search and store available broadcasts.
Satellite Installation
If you select the SATELLITE option, you can set a
satellite and watch individual satellite programmes.
When selecting satellite installation, the antenna type
menu will be displayed. You can choose between
three types of antennas. By using the Left/Right keys
you can select the antenna type (Direct, Unicable
or DiSEqC).
To Next Page
Loading...
Need help?
General
