How to prepare the record player
for operation
Š Before assembly, make sure the accessories are
complete.
Š Assemble the dust cover at the very end, to make it
more convenient for assembling and adjusting the
system!
Š Put the record player on a stable, vibration-free and
horizontal surface.
Š Place the record player as far away as possible from
the loudspeakers and keep it isolated from the
sound they produce, to minimise vibrations.
Turntable
Š Carefully set the turntable onto the turntable spindle 3.
Turntable mat
Š Put the turntable mat (antistatic felt mat) on the
turntable.
Spindle adapter
The spindle adapter is required, for example, for singles
without their own plastic spindle adapter. When the
spindle adapter is not in use, you can store it in the
designated area 1.
Installing the tone arm head
Š Install the tone arm head 1 on the tone arm shaft 3 as
shown.
1 3
2
Š Secure the tone arm head on the tone arm by
turning the ring nut 2 as shown, while holding the
tone arm head horizontal.
To Next Page
Loading...
Need help?
General
