TechniSat TechniPlayer LP 300 - The Stylus Illuminator; The Dust Cover

1
3
How to prepare the record player for operation
The stylus illuminator
Š Press the stylus illuminator switch A. The stylus
illuminator B move out and illuminates the stylus tip.
Š If the stylus illuminator is not needed, press it back
down into the frame. The lamp goes out at the same
time.
The dust cover
Š Flip the hinges on the housing towards the back.
Š Uniformly push the right and left dust cover
receptacles onto the hinges.
Š Make sure the locking spring clicks into place.
B
A