TechniSat TECHNIRADIO 6 IR - Page 114

114
If DAB+ is being started for the first time, a full station scan is performed. Aer
completing the scan, a station can be selected from the station list and be
played by pushing the SELECT knob.
9.2.1 Performing a full scan
The automatic scan Full Scan scans all DAB+ Band III stations and thereby
finds all stations being broadcast within the reception range.
Aer completing the scan, a station can be selected from the station list and
be played by pushing the SELECT knob.
> In order to perform a complete scan, open the Main menu by pressing the
MENU buon and use the SELECT knob to select [Full Scan].
> Press the SELECT knob.
>
[Scanning...] appears on the display.