115
DE
EN
FR
NL
During the scan a progress bar and the number of stations found is displayed.
If no stations are found, check the dipole antenna and change the installation
location if required (Section 6.3.1).
9.2.2 Manual seing
This menu item is used to check the reception channels and can be used to align the
antenna. Furthermore, stations can be added manually.
> In order to perform a full manual scan, open the Main menu by pressing the
MENU buon and use the SELECT knob to select [Manual seing].
> Press the SELECT knob.
> Select a channel (5A to 13F) using the SELECT knob. Press the SELECT knob
- its signal strength is now shown on the display. If a DAB+ station is being
received on a channel, the station ensemble name is displayed. The antenna
can now be aligned to the maximum signal intensity.
To Next Page
Loading...
