32
8.12.1 Calling up the Electronic Program Guide
> Press the SFI button to call up the electronic program guide.
The electronic program guide appears under Program guide > Start category in the preset start
category. The Overview start category is selected as the default setting.
8.12.2 SFI overview
1: Viewing time > indicates when programs are to be shown.
Time line > a graphical display of the viewing time in the form of progress bars.
2: Channel name with the corresponding channel slot within the active channel list.
3: Progress bars or the start/stop time of the program being shown.
4: The current date and time.
5: Programs on the channel being shown.
> Use the right/left arrow keys to adjust the display time either backwards or forwards.
The progress bar will also be moved backwards or forwards along the time bar according to the
display time.
> Using the yellow function key, you can switch directly to a view of the programs currently running and
the programs coming up next, and the configured prime time viewing slots.
Your preferred prime time times can be specified under Channel guide > Start category.
> By pressing the up/down arrow keys, it is possible to move the highlight from line to line, and to
move upwards and downwards page by page using the Page up/down buttons.
> If further information is available on the highlighted program, you can call this up/exit it by pressing
the Info button.
> Press the OK button to switch directly to the highlighted channel.
> You can exit the electronic program guide again by pressing the SFI button.
5
4
2
3
1
To Next Page
Loading...
