33
EN
If global parental control is enabled, the device PIN code will be requested
again when the blocked channel is switched on. To make things easier for you,
you only need enter the PIN code once during each operating phase.
To do so, it is essential that you also observe the instructions and seings
regarding the global user-dependent parental controls (TechniFamily) in your
instruction manual.
6.3.7 Back to the last channel set
> Press the Back buon on the remote control to return to the last channel
selected.
> Press the buon again to return to the channel you were previously watching.
6.3.8 Switching between TV/Radio
> Use the TV/Radio buon to switch between TV and radio mode.
The device switches to the last radio channel listened to.
Also observe the seing for the OSD radio/music in your instruction manual.
6.3.9 Selecting a regional channel
During the initial installation, you selected your preferred regional channels for some
channels. If you now set one of these channels, a note appears in the info box stating
that additional regional channels are available for selection.
> Using the Option selection you can select between the various regional
channels in the Region item.
The selected regional programme is now stored as a preferred regional
programme from this programme provider.
6.4 Info box
An info box is displayed on the screen for the time set in Menu > Seings >
Special functions > OSD > Display time every time you change channels. It
can also be retrieved manually by pressing the Info buon on the remote control.
This info box displays the location and name of the selected channel, the title of the
current channel and the currently active channel list.
To Next Page
Loading...
Need help?
General
