EasyManuals Logo

TechniSat TECHNISTAR S6 User Manual

TechniSat TECHNISTAR S6
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
EN
3.2 Sat system
> ConnectLNB input (8)on the digital receiver to your external unit using a
suitable coaxial cable.
Also observe the section on Antenna seing in the instruction manual.
It is not possible to receive analogue TV!
3.3 Connecting to a TV
> Connect the receiver (HDMI output 11) and the TV (HDMI input) using an HDMI
cable (included in the scope of supply). If your television set is appropriately
equipped, it will switch to the HDMI input automatically when the digital
receiver is switched on. Optionally, you can also connect the receiver to the TV
set via analogue. To do so, see Section 3.7.
3.4 Hi-Fi / surround amplifier
To achieve the best possible sound quality, you can connect your digital receiver to a
Hi-Fi surround amplifier:
3.4.1 Digital
> If your amplifier has an appropriate electrical input, connect theSPDIF (13)
socket to the electrical input on your amplifier.
Depending on the signal provided by each individual broadcaster, sampling
rates of 32, 44.1 and 48 kHz are available. In addition, where broadcast, the
Dolby Digital signal is also available on this output.
3.4.2 Analogue
> To do this, connect the optionally available TechniSat specific adapter set
to the AV OUT (12) socket on the receiver and the audio input on your Hi-
Fi / surround amplifier. (e.g. CD or AUX; aention - the phono input is not
suitable!)
3.5 USB port
The USB port (10) is used for updating the operating soware and transferring data.
Moreover, using the movie/DVR, music or picture playback (for more information
see the instruction manual) etc., you can access MPEG, MP3 or JPG files on the USB
storage medium. You can also insert an external WLAN dongle, e.g. the TELTRONIC
ISIO TC USB WLAN adapter (Item No. 0004/3633), into the USB port for this
purpose. To do so, see the WLAN seings section in the instruction manual.
Using a Bluetooth dongle (Item No. 0000/3635) it is possible, for example, to
connect the Bluetooth audio receiver to the receiver.
When connecting a USB storage medium, you should also note the section 10
(Storage volume selection).

Other manuals for TechniSat TECHNISTAR S6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat TECHNISTAR S6 and is the answer not in the manual?

TechniSat TECHNISTAR S6 Specifications

General IconGeneral
Signal sourceEthernet (RJ-45), Satellite
Supported video modes576i, 576p, 720p, 1080i, 1080p
Digital signal format systemDVB-S, DVB-S2
Personal Video Recorder (PVR) included-
Tuner typeDigital
Product colorBlack
Number of tuners1 tuner(s)
Audio output channels- channels
On Screen Display (OSD)Yes
Audio formats supportedAAC, AC3, AIFF, FLAC, MP2, MP3, OGG, WAV
Image formats supportedBMP, GIF, JPEG, PNG, TIFF
Video formats supportedASF, AVI, M2TS, M4V, MKV, MOV, MP4, MPG, TS, TS4, XVID
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates10, 100 Mbit/s
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)4.8 W
Package weight1240 g
Weight and Dimensions IconWeight and Dimensions
Depth177 mm
Width220 mm
Height45 mm
Weight600 g

Related product manuals