TechniSat TECHNISTAR S6 How-To

Please aim the remote control
toward the decoder and operate slowly.
If the decoder fails to respond properly,
we suggest to replace the existing set
of batteries with new ones.
How to re-tune to the new frequency of JSTV HD
TechniSat TECHNISTAR S6
Our frequency has been updated.
If you have a TechniSat TECHNISTAR S6, please follow the instructions below to add JSTV HD channels to your decoder.
Number keys
OK
Yellow
Green
MENU
Arrow
OPT
＜＜Buttons you need＞＞
If your decoder is currently connected to the TV with a SCART cable, connecting with a HDMI cable will allow you to watch JSTV with a higher resolution.
Please note that changing cables means you need to choose a different TV input channel such as HDMI 1.

TechniSat TECHNISTAR S6 Specifications

General

Signal source	Ethernet (RJ-45), Satellite
Supported video modes	576i, 576p, 720p, 1080i, 1080p
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Black
Number of tuners	1 tuner(s)
Audio output channels	- channels
On Screen Display (OSD)	Yes
Audio formats supported	AAC, AC3, AIFF, FLAC, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPEG, PNG, TIFF
Video formats supported	ASF, AVI, M2TS, M4V, MKV, MOV, MP4, MPG, TS, TS4, XVID
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN data rates	10, 100 Mbit/s
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	4.8 W
Package weight	1240 g

Weight and Dimensions

Depth	177 mm
Width	220 mm
Height	45 mm
Weight	600 g