GB 7
WEATHER ICONS
There are six possible types of weather icons that will be displayed:
SUNNY AND
CLOUDY
(PARTLY
SUNNY)
Frost Alert Icon appears when
outdoor temperature is below
+3°C
AIR PRESSURE TENDENCY INDICATORS
When the arrow appears, the air pressure is increasing, the weather is expected to improve.
When the arrow appears, the air pressure is decreasing, the weather is expected to become worse.
When the arrow appears, the air pressure change is stable.
Remarks: Moving your weather station from one floor of a building to another floor will affect the accuracy
of your weather station, which should operate at the same altitude all the time. If you move it to a new
location, it will take 12 hours to get stable and accurate again.
Our weather station provides next 12 hours weather forecast. It may not match with the current weather condition outside.
TO READ MAXIMUM-MINUMUM IN-OUT TEMPERATURES AND HUMIDITIES
Press MEM once to view the maximum indoor-MAX
the display. Press again to view the minimum indoor-MIN
icons appearing on the display.
When the maximums or minimums are displayed, press and hold the MEM to reset both records and it will start to record
the maximums and minimums again.
TO DISPLAY AIR PRESSURE READOUT
When MAX or MIN is not displayed, press and hold MEM until the calendar display shows the air pressure readout in hPa.
Press and hold MEM again to revert back to calendar display.
IF YOU LOSE THE OUTDOOR TEMPERATURE AND HUMIDITY
When the outdoor temperature and humidity digits show '---", the wireless transmission is either interrupted or lost. Press
and hold the c / CHANNEL button to start searching for the signal from the outdoor transmitter with the flashing.
If you continue to lose the outdoor temperature and humidity display, which could happen in extreme cold weather, try
placing the transmitter in a different location until you have smooth transmission of temperature / humidity data.
To Next Page
Loading...
Need help?
General
