Technogym Easy Lamp - Page 25

Easy Lamp: Service & maintenance manual – rev. 1.0
Page 4.7
THE EASY LAMP
MAKES A BLUE
LIGHT
Program mode: refer to the user's
manual to correctly program the
Easy Lamp.
Check again the battery
voltage. Is it lower than 12Vdc?
NO
Check the battery voltage. Is it
lower than 12Vdc?
NO
YES
NO
Replace the electronic board.
Press 3 in the remote control to
exit f rom Easy Lamp program
mode. Does it work?
Re-charge battery f or at least
14 hours. Does the blue light
still flashes?
Low battery. Re-charge at least
every 30 hours of lamp running
time.
YES
YES
NO
YES
Replace the battery .