Technogym element+ Chest Press - Weight Stack Guide Lubrication; Lubrication Steps

12
Chest Press
Routine maintenance
To lubricate the weight stack guides:
- remove the back panel of the weight stack (following the instructions found in the section Removing the weight stack panel);
- use a soft cloth to remove any dust and oil residues from the guides;
- slightly moisten the cloth with the oil supplied;
- using this cloth, apply a very thin layer of lubricant over the guides, being careful not to apply too much;
- replace the back panel of the weight stack (following the instructions found in the section Removing the weight stack panel in reverse
order).
For maintenance actions not described in this manual, call in the Technogym Technical Service.