10
Lower Back
Lifting and moving the product
Normal lifting and transport equipment must be used to move the product.
It is recommended to place some padded material between the frame and the lifting machine.
Before lifting the equipment, insert between the two panels of the weight stack the spacer provided at the time of delivery
Lift the equipment from the weight stack side, as shown in the gure.
W
Given the weight of the product, we recommend that it should always be moved by more than one person.
Move the product very carefully, because it may become unstable and tip over.
When lifting the product, do not exert pressure against the weight stack guards.
Do not use the range of movement (ROM) lever to try to move the equipment: danger of HARM and instability.
To Next Page
Loading...
