RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 12.2
12.2. REQUIRED TOOLS
The following tools are required for carrying out the various disassembly, adjustment and
maintenance action on the machine:
• Small Phillips screwdriver;
• Medium Phillips screwdriver;
• 7mm wrench;
• 15mm wrench;
• 17mm wrench;
• 3mm Allen T-wrench;
• 4mm Allen T-wrench;
• 6mm Allen T-wrench;
• 13mm socket wrench;
• Snap ring pliers;
• Bicycle pedal extractor;
• Torque wrench;
• Flatness comparator.
The tool sizes are expressed in mm.
You can order a complete set of hexagonal wrenches consisting of 7 pieces: 2, 2.5, 3, 4, 5,
6 and 8mm. The code to be used is R0003677AA.
• PC equipped with Service Excite Loader
• Serial communication cables for Excite Loader (cod. R0002534AB);
• Excite Test box (cod. H0003180AA-UK).
• Clean Well bottle (cod. 0V000356AA).
• Touch up paint “AL” color (RAL 9006) ml.10, to retouch the frame (cod. 0P051P).
• Spray can “AL” color (RAL 9006) ml.400, to retouch the frame (cod. 0V000190AA).
To Next Page
Loading...
