Technogym GROUP CYCLE - Page 12

12
B
C
E
D
A
Group Cycle
Maintenance
Pos. Description Type of check
Intervention
schedule
Type of intervention
A
Cleaning
Check that the
equipment is clean.
Every day.
Every time you nish using the product, clean it with a damp sponge and
neutral soap to remove any sweat and wetness. Then dry it carefully.
B
Drive belt
Check that the belt is tensioned and aligned
correctly.
Every 6 months. Follow the instructions in the manual.
C
Pedals
Check that the pedals are secured correctly on
the pedal crank and that they are not worn.
Every 3 months. Secure the pedals with a torque of 40 Nm and replace if worn.
D Pedal cranks Check the tightening of the central axle. Once a year Tighten the fastening screw to a tightening torque of 50 Nm.
E
Saddle
Check the stability of the saddle. Every 6 months Tighten the two seat attachment nuts to a tightening torque of 25 Nm.