EasyManua.ls Logo

Technogym PA04 - User Manual

Technogym PA04
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE & MAINTENANCE MANUAL
Rev. 1.2

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Technogym PA04 and is the answer not in the manual?

Summary

Technical Characteristics

Installing and Moving the Machines

Fixing a Wall: Ercolina, Ercolina Rehab e Cross Cables

Instructions for securing Ercolina, Ercolina Rehab, and Cross Cables machines to a wall.

Fixing the Ceiling: Cavi Incrociati

Guidance on securing 'Cavi Incrociati' type machines to the ceiling.

How to Disassemble the...

What If...

Special Operations

Locking Down the Cable Fixing Dowels

Ensures weight stack cable fixing dowels are securely locked to prevent cable detachment.

Locking Down the Pulleys

Procedure to ensure pulley screws are properly tightened to prevent issues.

Locking Down the Dowels on the Arm Extension Lever

Details on securing dowels on the Arm Extension lever to prevent damage and ensure stability.

Maintenance

Check the Cross, Bars and Weight Stack Plates

Monthly checks on cross, bars, and weight stack plates for wear and fastening.

Check the Cables

Monthly inspection of machine cables for wear, damage, and proper tension.

Check the Mechanisms

Monthly checks and lubrication of machine mechanisms like lever arms and shafts.

Check the Gas Springs

Monthly checks on gas springs for efficiency and cleaning of stems.

Check the Weight Stack Stops

Monthly checks on weight stack stops for wear and secure fastening.

Check the Leg Press Seat Mechanism

Monthly inspection of the Leg Press seat mechanism, including bars and pulleys.

Checking the Seat Mechanism on Low Machines

Monthly checks for seat mechanisms on low machines (Leg Extension, Leg Curl).

Checking the Seat Mechanism on Tall Machines

Monthly checks for seat mechanisms on tall machines (Arm Curl, Chest Press, etc.).

Check the Pulleys

Check pulley grooves for wear and replace if necessary.

Check the Cam Group

Inspect cam grooves for wear and ensure all cam group parts are tightened.

Check the Lever Stops

Check lever stops for wear and ensure they are securely fastened.

Replacing the Cables

Guidelines for replacing machine cables based on usage frequency.

Lubricating the Release Systems

Lubrication of release systems on specific machines like Adductor and Leg Extension.

Screw and Bolt Check

Check and tighten screws and bolts, especially in critical areas.

Checking for Mechanism Play

Ensure machine mechanisms have no play; repair or replace worn parts.

Checking Cross Alignment

Verify proper alignment of the selector rod and smooth plate selection.

Technogym PA04 Specifications

General IconGeneral
BrandTechnogym
ModelPA04
CategoryFitness Equipment
LanguageEnglish

Related product manuals