Need help?Do you have a question about the Technogym PURESTRENGTH and is the answer not in the manual?
Introduction to the manual for Technogym Service technicians.
Recommended steps for planning repair procedures.
General rules and precautions for performing repair procedures.
Code structure for PURESTRENGTH equipment identification.
Code structure for PURESTRENGTH benches identification.
Operating and storage temperature and humidity requirements.
List of directives and safety standards the equipment complies with.
Minimum load to lever without weights for various equipment models.
Detailed specifications for individual PURESTRENGTH equipment models.
Detailed specifications for various PURESTRENGTH bench models.
Requirements for proper installation of the equipment.
Procedure for assembling equipment delivered on a pallet.
Reference to User Manual and Installation Manual for installation procedures.
Guidelines for safely moving and lifting the equipment.
Instructions for fastening equipment to the ground using Ø10mm holes.
Instructions for fastening the Power Rack (PG11) to the ground using Ø13mm holes.
Details and specifications for the Plate Rack accessory.
Description of the Plate Holder Kit with 2 pins and compatible equipment.
Description of the Plate Rack Kit with 1 pin and compatible equipment.
Details and specifications for the Plate Support accessory.
Details and specifications for the Connect Adjustable Rack accessory.
Details and specifications for the 10-Seat Barbell Holder Rack.
Details and specifications for the 10-Pair Handlebar Holder Rack.
List and description of accessories for PG11 (Power Rack).
Procedures for disassembling common components across multiple equipment types.
Steps to disassemble the seat adjustment system.
Steps to disassemble the handles from the equipment.
Further steps for disassembling the handles.
Steps to disassemble the upholstery from the equipment.
Steps to disassemble the lever limit buffers.
Steps to disassemble the easy-start lever spring.
Steps to disassemble the levers, including bearing details.
Steps to disassemble plate rack pins for all equipment and specific models.
Steps to disassemble the stretching handle.
Steps to disassemble the adjustable foot of the equipment.
Specific disassembly procedures for the Calf (MG45) equipment.
Steps to disassemble the calf guard.
Steps to disassemble the calf padding.
Steps to disassemble the calf carriage and its components.
Steps to disassemble the calf carriage wheels and rollers.
Steps to disassemble the calf limit buffers.
Specific disassembly procedures for the Leg Press (MG50) equipment.
Steps to disassemble the Leg Press guard.
Steps to disassemble the Leg Press easy start lever.
Steps to disassemble the Leg Press platform lever.
Steps to disassemble the adjusting backrest system for PG03.
Steps to disassemble the backrest adjustment group.
Steps to disassemble the backrest tubular metal piece.
Steps to disassemble the thigh support group for PG05.
Steps to disassemble the seat group for PG06 Scott Bench.
Steps to disassemble the platform for PG07 Olympic Flat Bench.
Steps to disassemble the seat group for PG23 Olympic Decline Bench.
Refer to common disassembly procedures for Seat Dip (MG55).
Specific disassembly procedures for the Biceps (MG60) equipment.
Steps to disassemble the handle group of the Biceps (MG60).
Steps to disassemble the connecting rod for the Biceps (MG60).
Steps to disassemble the upholstery for the Biceps (MG60).
Steps to disassemble the cast iron counterweight for the Biceps (MG60).
Specific disassembly procedures for the Leg Extension (MG65) equipment.
Steps to disassemble the selection pin for the Leg Extension (MG65).
Steps to disassemble the backrest adjustment lever.
Steps to disassemble the spring for the Leg Extension (MG65).
Specific disassembly procedures for the Standing Leg Curl (MG70) equipment.
Steps to disassemble the handle for the Standing Leg Curl (MG70).
Steps to disassemble the platforms sliding system.
Steps to remove the foot support.
Steps to disassemble the roller.
Specific disassembly procedures for the Linear Leg Press (MG75) equipment.
Steps to disassemble sliding bars and carriage bearings.
Steps to disassemble the easy-start lever group.
Steps to disassemble the seat adjusting system.
Steps to disassemble the limit stop.
Steps to disassemble the spring.
Steps to disassemble the easy-start lever group (continued).
Troubleshooting steps if the handles rotate improperly.
Troubleshooting steps for levers not resting against buffers.
Troubleshooting steps for incorrectly positioned leg press buffers.
Troubleshooting steps for misaligned carriage sliding bars.
Troubleshooting steps for an unstable calf carriage.
Troubleshooting steps if the equipment is not level.
Procedure for adjusting the bench platform tension.
Description of ordinary maintenance operations performed by the owner.
Description of extraordinary maintenance performed by qualified technicians.
General| Frame Material | Steel |
|---|---|
| Upholstery Material | High-density foam with durable, sweat-resistant covering |
| Adjustability | Yes |
| Weight Loading | Weight stack or plate loaded, depending on the specific machine. |
| Color Options | Black |
| Dimensions | Varies depending on the specific machine. Refer to individual product specifications. |
To Next Page