Technogym PURESTRENGTH - Standing Leg Curl (MG70) Disassembly; Standing Leg Curl Handle Disassembly

PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 5.39
5.12. DISASSEMBLING THE STENDING LEG CURL (MG70)
5.12.1. DISASSEMBLING THE HANDLE
Figure 5.12-1
For each handle:
1.
Unscrew the ringnut counter clockwise with
a 45-50mm sector wrench.
Figure 5.12-2
2. Unscrew the lower grub screw (b).
Figure 5.12-3
3. Remove the handle (c).
To reassemble the removed parts, carry out the
disassembling steps in reverse order.