PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 3.3
3.5. EQUIPMENT FASTENING TO THE GROUND
The hole in the frame of the equipment is Ø10mm.
1. Remove the caps and mark the position on the ground with a marker;
2. Drill the holes on the marks;
3. Reposition the equipment and apply the dowels.
Compatible Equipment
Chest Press
MG1000 Wide Chest Press
MG1500 Incline Chest Press
MG2000 Pulldown
MG2500 Low Row
MG3000 Row
Plate Tree
To Next Page
Loading...
