Technogym PURESTRENGTH - Plate Rack Pin Disassembly

PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 5.9
5.1.8. DISASSEMBLING THE PLATE RACK PINS
The following operation is applicable to all equipments.
Figure 5.1-19
1. Remove the cap (a), unscrewing the screw
(b) using a 6mm hexagonal key.
2. If the cap support (c)
needs to be replaced,
prize it out using a screwdriver blade.
To reassemble the removed parts, carry out the
disassembling steps in reverse order.
This operation is applicable to the following EQUIPMENT: Calf and Leg Press.
Figure 5.1-20
For Calf:
1. Unscrew the screws (a)
using a 17mm
wrench.
2. Pull out the black guard (b).
3. Remove the pin.
To reassemble the removed parts, carry out the
disassembling steps in reverse order.
Figure 5.1-21
For Leg Press:
1. Unscrew the screws (a)
using a 17mm
wrench.
2. Pull out the black guard (b).
3. Remove the pin.
To reassemble the removed parts, carry out the
disassembling steps in reverse order.