PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 5.13
5.2.2. CALF PADDING
Figure 5.2-2
Disassemble the guard as described in
paragraph: "5.2.1. Calf Guard".
1. Unscrew the screws (a) using a 17mm
wrench.
2. Remove the backrest.
Figure 5.2-3
3. Unscrew the screws (b) using a 17mm
wrench.
4. Remove the seat.
To reassemble the removed parts, carry out the
disassembling steps in reverse order.
To Next Page
Loading...
