Technogym RECLINE PERSONAL D9673

Need help?

Do you have a question about the Technogym RECLINE PERSONAL D9673 and is the answer not in the manual?

Summary

MACHINE INSTALLATION MANUAL

Equipment Necessary for Installation

Lists tools and equipment required for the machine installation process.

People Necessary for Installation

Specifies the number of personnel required to safely and effectively install the machine.

UNPACKING MACHINE

Phase 1: Initial Unpacking

Cut straps and remove the outer cardboard packaging box from the machine.

Phase 2: Box Removal and Positioning

Operator actions for removing protective bags and positioning internal component boxes.

Phase 3: Machine Positioning

Guidance on grasping and safely moving the machine into its final installation location.

Phase 4: Backrest Assembly (Operator A)

Steps for Operator A to attach the backrest unit, including hardware.

Phase 4: Cable Management (Operator B)

Operator B's tasks for removing front guards and managing cables during unpacking.

INSTALLATION PHASES

Phase 5: Video Unit Installation (Operator A)

Operator A's steps for installing the TV unit, connecting wires, and securing components.

Phase 5: Video Unit Installation (Operator B)

Operator B's tasks for securing cables, caps, and checking adjustments for the video unit.

Phase 6: Final Setup and Testing

Operator A connects power, tests functions; Operator B cleans the installation area.

MACHINE TECHNICAL INFORMATION

Technical Specifications

Details power supply, weight, dimensions, and environmental operating conditions.

Hardware and Components List

Lists specific hardware codes, descriptions, and quantities for installation.

Installation Time Standards

Provides estimated times for installation and handling by a specified number of persons.