Technogym PURESTRENGTH - Calf Limit Buffer Disassembly

PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 5.18
5.2.5. DISASSEMBLING THE CALF LIMIT BUFFERS
Figure 5.2-3
For this operation, it is important to
secure the seat carriage to the top part of
the frame.
Figure 5.2-3
1. To remove the carriage limit buffers,
unscrew the screws (a)
using a 6mm
hexagonal key.
To reassemble the removed parts, carry out the
disassembling steps in reverse order.