Technogym PURESTRENGTH - Leg Press (MG50) Disassembly; Leg Press Guard Disassembly

PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 5.19
5.3. DISASSEMBLING THE LEG PRESS (MG50)
5.3.1. LEG PRESS GUARD
Figure 5.3-1
On both sides:
1.
Remove the rear guard by unscrewing the
screws (a) with a Phillips screwdriver.
To reassemble the removed parts, carry out the
disassembling steps in reverse order.