Technogym PURESTRENGTH - What to Do If...; Troubleshooting: Rotating Handles

PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 6.1
6. WHAT TO DO IF …
6.1. THE HANDLES ROTATE
Figure 6.1-1
1. Check that the handle (a) is fitted on the
lever so that the slot coincides with the grub
screw (b).
Figure 6.1-2
2. Tighten the screw (c), using a 6mm
hexagonal key.
Do not use sealants and/or thread
compounds on the screw, as this would
prevent future disassembly of the handle.