Technogym PURESTRENGTH - Calf (MG45) Disassembly; Calf Guard Disassembly

PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 5.12
5.2. DISASSEMBLING THE CALF (MG45)
5.2.1. CALF GUARD
Figure 5.2-1
1. Remove the rear guard by unscrewing the
screws (a) with a Phillips screwdriver.
To reassemble the removed parts, carry out the
disassembling steps in reverse order.