PURESTRENGTH & BENCHES: Guida all'Assistenza Tecnica - rev. 4.1
Page 5.29
5.8. DISASSEMBLING THE SEAT GROUP (PG23 – OLYMPIC
DECLINE BENCH)
Figure 5.8-1
1. Bring the back-rest in the resting position.
2. Remove the spring (a) from the seat.
Figure 5.8-2
3. Remove the knob (b) unscrewing the central
screw, using a 4mm wrench.
Figure 5.8-3
4. Unscrew the pin (c) using a 17mm wrench.
5. Unscrew the 4 screws (d)
Phillips screwdriver.
6. Remove the back-rest (e).
Continued on following page
→
To Next Page
Loading...
