15
SKILLMILL
USING THE CHEST STRAP
The lower part of the display contains a receiver which receives the heart rate signals from the telemetric
chest strap.
The transmission technology used is Bluetooth Smart.
The chest strap must be paired with the product in order for the heart rate to be shown on the display.
The connection must be repeated with each exercise.
Press the heart symbol on the lower part of the display to connect to the chest strap. The chest strap must be less than 30 cm from the
receiver.
Keep as close to the receiver as possible for 10 seconds to facilitate the connection.
The heart icon ashes on the display while the connection is being negotiated; then, when the connection has been successfully
established, the icon remains lit and the instantaneous heart rate is displayed.
The heart rate is expressed in beats per minute.
If the AVG (average) symbol is present, this means that the average heart rate since the beginning of the exercise
is being displayed.
If the MAX symbol is present, this means that the maximum heart rate reached during the exercise is being displayed.
To Next Page
Loading...
