Technogym Skillmill GO User Manual

Skillmill
Technical Service Guide
rev. 2.2 - (SePTemBer 2016)

Technogym Skillmill GO Specifications

General

Type	Non-motorized treadmill
Warranty	2 years
Display	LCD
Connectivity	Bluetooth
Drive	Non-motorized
Max User Weight	180 kg

Summary

GENERAL WARNINGS

1.3 GENERAL REGULATIONS REGARDING SERVICE WORK

1.3.1 PERSONAL PROTECTIVE EQUIPMENT

Details on required personal protective equipment for service operations.

WIRING DIAGRAMS

2.7.1 WIRING DIAGRAM, CONNECT VERSION

2.7.2 WIRING DIAGRAM, CONSOLE VERSION

2.8 CABLES

Details the pin-out and color coding for various CU cables.

OPERATING PRINCIPLE

3.1 ELECTRONIC COMPONENTS

3.1.2 DISPLAY (CONNECT VERSION)

3.1.4 LOW KIT

Explains the Low Kit's role in sensor data and brake calibration.

3.1.5 RPM SENSOR

3.1.6 ANGLE SENSOR

MOVING AND INSTALLING THE EQUIPMENT

5.1 INSTALLATION SPECIFICATIONS AND REQUIREMENTS

Guidelines for equipment placement, environment, and power requirements.

LIFTING AND MOVING THE EQUIPMENT

TROUBLESHOOTING & CONFIGURATION

6.1 EXECUTABLE SW FOR DIAGNOSTICS WITH PC

Procedure for using diagnostic software on a PC for troubleshooting.

STRUCTURE FOR ENTERING COMMANDS

6.2.1 READING FIRMWARE VERSIONS

READING AND WRITING THE SERIAL NUMBERS AND IDENTIFICATION PARAMETERS

6.2.2.1 WRITING THE CONSOLE SERIAL NUMBER

6.2.2.2 READING THE CONSOLE SERIAL NUMBER

6.2.2.5 WRITING THE LOW KIT SERIAL NUMBER

6.2.2.6 READING THE LOW KIT SERIAL NUMBER

WI-FI AND NETWORK CONFIGURATION

6.2.3.1 ENTERING A NAME FOR THE NETWORK

6.2.3.2 WRITING THE ACCESS POINT PARAMETER

6.2.3.4 CHECKING CONNECTION TYPE

6.2.3.5 WRITING THE CONSOLE IP ADDRESS

6.2.3.6 WRITING THE GATEWAY ADDRESS

6.2.3.7 CHECKING THE IP ADDRESS - DEFAULT GATEWAY - NETMASK

CONFIGURING THE REALTIME MONITOR

6.2.4.1 SETTING PARAMETERS

6.2.4.2 SETTING THE DATA SEND PERIOD

6.2.4.3 DISPLAYING THE MONITOR CONFIGURATION

6.2.4.4 ENABLING DATA SENDING

6.2.4.5 DISABLING DATA SENDING

CONFIGURATION AND SETTINGS FOR CLASSES: SKILLMILL APP

6.3.1 STEPS NECESSARY FOR CONFIGURING THE SKILLMILL APPLICATION

Step-by-step guide for configuring the Skillmill application and Unity Self.

TROUBLESHOOTING

6.5.1 THE DISPLAY DOES NOT TURN ON (CONNECT VERSION)

Troubleshooting flowchart for display not turning on in Connect version.

6.5.2 THE DISPLAY DOES NOT TURN ON (CONSOLE VERSION)

Troubleshooting flowchart for display not turning on in Console version.

6.5.3 THE DISPLAY ONLY TURNS ON AT A HIGH SPEED

Troubleshooting steps when display only activates at high speed.

6.5.4 THE EFFORT LEVEL DOES NOT CHANGE ON THE DISPLAY

Troubleshooting for when the effort level display is not changing.

6.5.5 THE EFFORT LEVEL DOES NOT CHANGE

Troubleshooting for when effort level and resistance do not change.

6.5.6 THE DISPLAY SHOWS AN ABNORMAL SPEED (CONSOLE VERSION)

Procedure for abnormal speed display in Console version.

6.5.7 LOGIN PROBLEMS

Understanding login issues, user icon states, and troubleshooting.

6.5.7.1 BLUETOOTH LOGIN PROBLEMS

Troubleshooting flowchart for Bluetooth login issues.

6.5.7.2 QR CODE LOGIN PROBLEMS

Troubleshooting flowchart for QR code login issues.

6.5.7.3 TGS_NFC LOGIN PROBLEMS

Troubleshooting flowchart for TGS/NFC login issues.

BRAKE TABLE CALIBRATION

DISASSEMBLY

7.2 DISASSEMBLING THE CONSOLE

Instructions for disassembling the console unit.

7.3 DISASSEMBLING THE NFC BOARD

7.4 DISASSEMBLING THE CENTRAL HANDLEBAR

7.5 DISASSEMBLING THE SIDE HANDLEBARS

7.6 DISASSEMBLING THE POST

BRAKING SYSTEM

7.7.1 DISASSEMBLING THE BRAKING SYSTEM

Instructions for disassembling the complete braking system.

7.7.2 REPLACING THE BRAKE CABLE

Instructions for replacing the brake cable.

7.7.3 REPLACING THE BRAKE FRAME

Instructions for replacing the brake frame.

7.7.4 REPLACING THE BRAKE DISC AND PULLEY

Instructions for replacing the brake disc and pulley assembly.

7.7.5 REPLACING THE ALUMINIUM BRAKE FRAME

Instructions for replacing the aluminium brake frame.

REPLACING THE PLATFORM

7.8.1 REPLACING THE SLATS

Instructions for replacing the platform slats.

7.8.2 REPLACING THE FRONT ROLLER

Instructions for replacing the front roller.

SW UPDATE

PLANNED MAINTENANCE