Technogym Skillmill GO - 6.5.7.2 QR CODE LOGIN PROBLEMS

6.5.7.2 QR CODE LOGIN PROBLEMS
Yes
Yes
Yes
No
No
No
Yes
The customer cannot log in.
QR code
Is the problem
repeated on
different
equipment?
Check if the
customer network
complies with
the minimum
configuraon
Configure the
network on the
display. Is the
problem solved?
Ok, done
Check that the serial number of the display read with the
terminal soware corresponds with the serial number read on
the QR code with a QR reader. Are they the same?
Replace
display
Set the
correct
number with
the terminal
soware
Skillmill
Technical Service Guide - Rev. 2.2
Page 56
e-mail: support@technogym.com