Need help?Do you have a question about the Technogym Run XT and is the answer not in the manual?
Illustrates the electrical connections for the 220 Volt model, including connectors.
Details the wiring for the 220 Volt USA model, highlighting differences from the standard 220V.
Shows the electrical connections for the 110 Volt model, noting specific differences.
Explains how the tread-belt motor speed is controlled via the CPU and inverter.
Describes the mechanism and signals controlling the treadmill's elevation motor.
Troubleshooting steps for when the machine's display screen remains blank.
Diagnoses and resolves error codes related to the emergency button function.
Addresses error messages indicating belt motor issues during operation.
Troubleshooting steps for inconsistent or jerky movement of the tread belt motor.
Solutions for when the tread belt motor experiences a delayed start.
Steps to diagnose and correct inaccuracies in the displayed speed reading.
Troubleshooting guide for error code E5 related to the up-down motor.
Addresses issues where the elevation mechanism only moves in a single direction.
Steps to resolve problems with inaccurate elevation readings on the display.
Troubleshoots the absence of a heart rate signal from the cardio receiver.
Diagnoses and resolves issues with inaccurate or intermittent heart rate readings.
Process for accurately setting the machine's speed control calibration.
Instructions for configuring the inverter's parameters for optimal operation.
A reference table listing inverter error codes and their meanings.
General| Incline | 0 - 15% |
|---|---|
| Running Surface | 52 x 151 cm / 20 x 59 in |
| Display | 15.6'' LCD capacitive touchscreen |
| Incline Range | 0 - 15% |
| Connectivity | Wi-Fi, Bluetooth |
| Power Supply | 220-240V, 50/60Hz |
To Next Page