Technogym Run XT - Hours of Use; Hours of Motor Use; Minutes of Up-Down Motor Use; Distance Travelled

RUN XT: Service & Maintenance Manual - rev. 2.0
Page 9.4
9.3.2. HOURS OF USE
To change this value, when the value actually in memory will scroll on the LED matrix, input the
desired value using the numeric keys to enter and press ENTER to confirm. Just press ENTER to
maintain the original value.
9.3.3. HOURS OF MOTOR USE
To change this value, when the value actually in memory will scroll on the LED matrix, input the
desired value using the numeric keys to enter and press ENTER to confirm. Just press ENTER to
maintain the original value.
9.3.4. MINUTES OF UP-DOWN MOTOR USE
To change this value, when the value actually in memory will scroll on the LED matrix, input the
desired value using the numeric keys to enter and press ENTER to confirm. Just press ENTER to
maintain the original value.
9.3.5. DISTANCE TRAVELLED
To change this value, when the value actually in memory will scroll on the LED matrix, input the
desired value using the numeric keys to enter and press ENTER to confirm. Just press ENTER to
maintain the original value.
The system will now go back to the standby mode. The “CLEAR” key can be pressed at any time to
interrupt the setup procedure and return the equipment to the standby mode.