RUN XT: Service & Maintenance Manual - rev. 2.0
Page 10.1
10. SCHEDULED MAINTENANCE
To keep the machine in perfect working order, carry out the scheduled maintenance operations set
out in the table below:
CLEANING TENSION
CHECK
WEAR
CHECK
FUNCTION
CHECK
LUBRI-
CATION
MACHINE
EXTERIOR
weekly
(A)
MACHINE
INTERIOR
monthly
(B)
TREAD BELT
monthly
(C)
weekly
(D)
RUNNING TRACK
fortnightly
(E)
monthly
(F)
DRIVING ROLLER
twice-yearly
(G)
DRIVEN ROLLER
twice-yearly
(H)
TREAD
MOTOR BELT
twice-yearly
(I)
twice-yearly
(J)
UP-DOWN MOTOR
BELT
twice-yearly
(K)
twice-yearly
(L)
ELEVATION
BARS
fortnightly
(M)
SHOCK
ABSORBERS
twice-yearly
(N)
EMERGENCY
BUTTON
monthly
(O)
DUST
FILTER
monthly
(P)
These operations must be carried out with the machine turned off and the mains lead
unplugged from the wall outlet.
The operations are described in detail below:
(A) EXTERNAL CLEANING
Carry out once a week.. Perform this operation with the machine turned off. Use only a neutral
detergent. Be careful never to spray the product directly on the machine; use a moistened
cloth.
To Next Page
Loading...
