Technogym Skillmill GO - 6.5.3 THE DISPLAY ONLY TURNS ON AT A HIGH SPEED

6.5.3 THE DISPLAY ONLY TURNS ON AT A HIGH SPEED
Ok finished
Yes
Ok finished
Yes
No
Replace the low kit
No
The display only turns on at
a high speed
Check the posion of the RPM sensor
and move it close to the screws that it
must detect. Is the problem solved?
Replace the RPM sensor and the
connecon cable. Is the problem
solved?
Skillmill
Technical Service Guide - Rev. 2.2
Page 52
e-mail: support@technogym.com