Technogym Skillmill Console User Manual

Skillmill
Technical Service Guide
rev. 2.2 - (SePTemBer 2016)

Technogym Skillmill Console Specifications

General

Display Type	LCD
User Profiles	Yes
Metrics Displayed	Speed, distance, time, calories, heart rate
Connectivity	Bluetooth
Power Source	Self-powered
Compatibility	Technogym App

Summary

1. GENERAL WARNINGS

2. TECHNICAL SPECIFICATIONS

2.1 MECHANICAL CHARACTERISTICS

2.7 WIRING DIAGRAMS

3. OPERATING PRINCIPLE

3.1.4 LOW KIT

5. MOVING AND INSTALLING THE EQUIPMENT

5.1 INSTALLATION SPECIFICATIONS AND REQUIREMENTS

5.2 LIFTING AND MOVING THE EQUIPMENT

Provides instructions on how to lift and move the equipment, emphasizing the need for multiple people and care to maintain stability.

6. TROUBLESHOOTING & CONFIGURATION

6.1 EXECUTABLE SW FOR DIAGNOSTICS WITH PC

Details the requirements and procedure for using PC software to diagnose and troubleshoot the equipment.

6.2 STRUCTURE FOR ENTERING COMMANDS

Explains the format and structure of commands used for interacting with the equipment via software.

6.2.1 READING FIRMWARE VERSIONS

Describes how to read firmware versions for different components of the equipment using specific commands.

6.2.1.2 (WI-FI) FIRMWARE VERSION

6.2.1.3 (BETTER KEYPAD) FIRMWARE VERSION

6.2.1.4 FIRMWARE VERSION (LOW KIT)

6.2.1.5 LOW KIT BRAKING TABLE VERSION

6.2.2 READING AND WRITING THE SERIAL NUMBERS AND IDENTIFICATION PARAMETERS

Details the command to set the serial number for the console.

6.2.2.1 WRITING THE CONSOLE SERIAL NUMBER

Details the command to set the serial number for the console.

6.2.2.2 READING THE CONSOLE SERIAL NUMBER

Details the command to read the serial number of the console.

6.2.2.3 SETTING THE FACILITY URL

Explains how to set the facility URL for the equipment using a specific command.

6.2.2.4 VIEWING THE FACILITY URL

Details the command to view the facility URL of the equipment.

6.2.2.5 WRITING THE LOW KIT SERIAL NUMBER

Provides the command to write the serial number for the Low Kit.

6.2.2.6 READING THE LOW KIT SERIAL NUMBER

Provides the command to read the serial number of the Low Kit.

6.2.2.7 DETERMINING MAC ADDRESS

Explains the command to display the Wi-Fi MAC address of the equipment.

6.2.3 WI-FI AND NETWORK CONFIGURATION

Details the command to set the SSID (network name) for Wi-Fi connection.

6.2.3.1 ENTERING A NAME FOR THE NETWORK

Details the command to set the SSID (network name) for Wi-Fi connection.

6.2.3.2 WRITING THE ACCESS POINT PARAMETER

Explains how to set the password for the Wi-Fi access point.

6.2.3.3 WRITING THE WEP KEY NUMBER

6.2.3.4 CHECKING CONNECTION TYPE

Details the command to display Wi-Fi configuration details like SSID, password, and encryption type.

6.2.3.5 WRITING THE CONSOLE IP ADDRESS

Explains how to set the static IP address for the console.

6.2.3.6 WRITING THE GATEWAY ADDRESS

Details the command to set the IP address of the default gateway.

6.2.3.7 CHECKING THE IP ADDRESS - DEFAULT GATEWAY - NETMASK

Describes the command to display the console's IP, default gateway, and netmask information.

6.2.3.8 READING THE WI-FI POWER

6.2.4 CONFIGURING THE REALTIME MONITOR

Details the command to set the IP address and UDP port for the real-time monitor.

6.2.4.1 SETTING PARAMETERS

Details the command to set the IP address and UDP port for the real-time monitor.

6.2.4.2 SETTING THE DATA SEND PERIOD

6.2.4.3 DISPLAYING THE MONITOR CONFIGURATION

6.2.4.4 ENABLING DATA SENDING

6.2.4.5 DISABLING DATA SENDING

6.3 CONFIGURATION AND SETTINGS FOR CLASSES: SKILLMILL APP

Describes the functionality of Skillmill and UNITY SELF apps for managing classes and personalized programs.

6.3.1 STEPS NECESSARY FOR CONFIGURING THE SKILLMILL APPLICATION

Provides a step-by-step guide for configuring the Skillmill application, Wi-Fi, and Unity Self.

6.4 DISPLAY CONFIGURATION (CONNECT VERSION)

Key Combinations for Display Settings

6.5 TROUBLESHOOTING

Provides a flowchart for troubleshooting the issue where the display does not turn on in the Connect version.

6.5.1 THE DISPLAY DOES NOT TURN ON (CONNECT VERSION)

Provides a flowchart for troubleshooting the issue where the display does not turn on in the Connect version.

6.5.2 THE DISPLAY DOES NOT TURN ON (CONSOLE VERSION)

Presents a flowchart for troubleshooting the display not turning on in the Console version.

6.5.3 THE DISPLAY ONLY TURNS ON AT A HIGH SPEED

6.5.4 THE EFFORT LEVEL DOES NOT CHANGE ON THE DISPLAY

6.5.5 THE EFFORT LEVEL DOES NOT CHANGE

6.5.6 THE DISPLAY SHOWS AN ABNORMAL SPEED (CONSOLE VERSION)

6.5.7 LOGIN PROBLEMS

Explains how to understand display icons and states to troubleshoot user login issues.

6.5.7.1 BLUETOOTH LOGIN PROBLEMS

6.5.7.2 QR CODE LOGIN PROBLEMS

6.5.7.3 TGS_NFC LOGIN PROBLEMS

6.6 BRAKE TABLE CALIBRATION

Details the procedure for calibrating the brake table, including specific button presses and lever movements.

7. DISASSEMBLY

7.7 BRAKING SYSTEM

7.7.4 REPLACING THE BRAKE DISC AND PULLEY

7.7.5 REPLACING THE ALUMINIUM BRAKE FRAME

7.8 REPLACING THE PLATFORM

7.9 DISASSEMBLING THE ROLLER BEARINGS (REAR ZONE)

7.10 DISASSEMBLING THE ROLLER UNIT

9. SW UPDATE

10. PLANNED MAINTENANCE