Need help?Do you have a question about the Technogym Skillmill and is the answer not in the manual?
General| Product Type | Non-motorized treadmill |
|---|---|
| Connectivity | Bluetooth, ANT+ |
| Incline | Fixed incline |
| Weight | 180 kg |
| Max User Weight | 180 kg |
| Console | Optional Console |
| Display | Optional LCD display |
Manual purpose and target audience.
Advice for effective technical assistance tasks and planning.
Rules and procedures for performing service work on the equipment.
Physical dimensions and weight of the equipment.
Operating and storage conditions for temperature and humidity.
List of European and American standards and directives the equipment complies with.
Explanation of the 16-character alphanumeric equipment code structure.
Breakdown of the alphanumeric characters used in the serial number.
Locations of labels indicating serial number and equipment code.
Electrical connection diagrams for different Skillmill versions.
Details on various cables used for connecting components.
Overview of key electronic components like power supply, display, etc.
Specific technical details differentiating European and USA versions.
Requirements for proper installation and placement of the equipment.
Safe procedures for lifting and relocating the equipment.
Steps for replacing main components and required actions.
Software and procedure for PC-based diagnostics.
Format for sending commands to the equipment via terminal.
Setting up the Skillmill app for virtual classes and Unity integration.
Procedures for configuring display settings and key backlighting.
Common issues and step-by-step solutions for Skillmill problems.
Procedures for calibrating the brake table.
Steps to set the equipment's date and time using terminal commands.
Standard tests to perform after service to ensure resolution.
List of tools required for disassembly and maintenance tasks.
Step-by-step guide to remove and reinstall the display unit.
Procedure for removing the NFC board from the equipment.
Instructions for dismantling and removing the central handlebar.
Procedure for removing the side handlebars.
Steps to dismantle and remove the upright support.
Detailed procedures for servicing the braking system components.
Procedure for removing and fitting the pin for the angle sensor board.
Instructions for disassembling and assembling the slats.
Steps to remove and reinstall the front roller assembly.
Procedure for removing rear zone roller bearings.
Steps to dismantle and remove the roller unit.
Procedure for removing roller unit bearings.
Procedures for disassembling and assembling the angle sensor board.
How to tighten belt pulley grub screws and related procedures.
Details on snap ring placement for belt pulleys on front and rear shafts.
Procedure for correctly positioning the brake unit stop screw.
Steps to level the equipment by adjusting its feet.
Indicates that no specific regulations are required for the equipment.
Step-by-step guide for updating the equipment's software.
Describes the folder structure for synchronizing software updates via PC.
Details of changes made in Revision 1.1 of the manual.
Details of changes made in Revision 2.0 of the manual.
Details of changes made in Revision 2.1 of the manual.
Details of changes made in Revision 2.2 of the manual.
Details of changes made in Revision 2.3 of the manual.
Details of changes made in Revision 2.4 of the manual.
Details of changes made in Revision 2.5 of the manual.
Details of changes made in Revision 3.0 of the manual.
Details of changes made in Revision 3.1 of the manual.
Details of changes made in Revision 3.2 of the manual.
Details of changes made in Revision 3.3 of the manual.
Details of changes made in Revision 3.4 of the manual.
Details of changes made in Revision 3.5 of the manual.
To Next Page
