Technogym Skillmill - 12. LIST OF CHANGES MADE DURING THE REVISION OF THE MANUAL; 12.1 REVISION 1.1; 12.2 REVISION 2.0; 12.3 REVISION 2.1

Skillmill:
Technical Service Guide - Rev. 3.5
Page 129email: support@technogym.com
12. LIST OF CHANGES MADE DURING THE REVISION OF THE MANUAL
The main changes made to this manual are listed below in chronological order.
12.1 REVISION 1.1
§2 - Technical specications - Connectivity: mode “n” eliminated.
12.2 REVISION 2.0
§1.2.1 - New paragraph - Personal Protective Equipment.
§2 - Technical specications - mywellness platform connectivity.
§2.1.2 -Packaging dimensions and weight: foreign packaging weight.
§2.3 - Conformity with directives.
§2.7.1 - Wiring diagram (Connect version): high voltage eliminated.
§2.7.2 - Wiring diagram (Console version): switch between power supply unit and CU0889
eliminated.
§3.1 - Electronic components.
§4 - Accessories.
§5.2 - Lifting and moving the equipment - information note changed.
§6.1 - Executable SW for diagnostics with PC: change to point 1.
§6.2 - Structure for entering commands: responses eliminated and signicant commands for AS
added.
§6.2.10 - Conguration and seings for classes: Skillmill app.
§6.2.10.1 - Steps necessary for conguring the Skillmill application.
§6.2.11 - Wi-Fi connection.
§6.3 - Display conguration (Connect version).
§6.5 - Brake table calibration.
§ 7 - Disassembly: “Disassembling the angle sensor” paragraph added; caution added in §7.8.1.
§9 - SW update: change to pop-up gure; change to point 2.
§10 - Scheduled maintenance.
12.3 REVISION 2.1
§1.2: New paragraph: “Tips”.
§6.3.1: Change to steps necessary for conguring the Skillmill application.
§6.1: Executable SW for diagnostics with PC.