Technogym Skillmill - Angle Sensor

7. If the baery is working correctly, reconnect it to the two connectors on the product.
Figure 17
8. Insert the baery in its seat and ret the front guard of the equipment.
Asalreadyexplained,iftherechargeismadewithoutdisconnectingthebaeryfromthemachine,
thebaerywillturnonautomaticallywhenthebaerychargerisconnectedandthebaerybuonwillbe
disabled.Whentherechargingprocedurehasended,thebaerywillbeautomaticallyONwhenthebaery
charger is disconnected.
3.1.7 ANGLE SENSOR
Figure 18 - front right-hand side of the equipment
Skillmill:
Technical Service Guide - Rev. 3.5
Page 35email: support@technogym.com