Technogym Skillmill - 1.2 TIPS; 1.3 GENERAL REGULATIONS REGARDING SERVICE WORK

1.2 TIPS
Technogym advises you to plan your technical assistance task in the following way:
Carefully assess the information given by the customer regarding the operating faults, and ask the
necessary questions to clarify how the problem shows itself.
Clearly diagnose the causes of the problem. This manual provides the fundamental theoretical
basis, which must then be integrated with personal experience and aendance at the training
courses regularly organised by Technogym.
Plan the repair work in a rational manner to avoid wasting time - e.g. collecting spare parts,
preparing the tools, etc.
Access the component to be repaired, avoiding any unnecessary operations (the disassembly
sequences shown in this manual should be used as a reference).
1.3 GENERAL REGULATIONS REGARDING SERVICE WORK
1. Check the serial number of the equipment, comparing it with the one on the work order.
2. Always mark any parts or positions which may be confused with each other at the time of
reassembly.
3. Use original Technogym spare parts and lubricants of the recommended brands.
4. Use special tools where specied.
5. Consult the Technical Newsleers and News Flashes, which may contain more up-to-date
information about regulation and maintenance than that contained in this manual.
6. Before starting the repair work, always make sure the recommended tools are to hand and
are in good condition.
 WARNING:thetechnicianisresponsibleformarkingofftheinterventionarea
andworkinginsafeconditions.
1.3.1 PERSONAL PROTECTIVE EQUIPMENT
For details, refer to the Health&Safety After Sales procedure, available on Technogym Direct.
Skillmill
Technical Service Guide - Rev. 3.5
Page 12
email: support@technogym.com