Technogym Skillmill - 8. ADJUSTMENTS AND REGULATIONS; 8.1 ADJUSTMENT; 8.2 REGULATION

8. ADJUSTMENTS AND REGULATIONS
8.1 ADJUSTMENT
In order for the equipment to function correctly, it must be level.
The equipment is levelled by adjusting the foot as shown in the gure:
- loosen the locknut (B);
- tighten or unscrew the foot (A) until the frame is in a stable position;
- when the regulation is complete, tighten the locknut (B).
BA
Figure 70
8.2 REGULATION
No regulations are required.
Skillmill:
Technical Service Guide - Rev. 3.5
Page 121email: support@technogym.com