31
SKILLMILL
TROUBLESHOOTING
Problem Cause Remedy
Problems in monitoring
heart rate with the chest
band
Other transmitters situated nearby.
Move the equipment far enough away to stop signal
interference (minimum distance between two units 80 cm).
Strong interference sources nearby.
Find the interference source (e.g. an electrical domestic
appliance) and move it away, or move the equipment.
Worn heart rate monitor chest band. Change the chest band.
Chest band transmitter not making proper skin
contact.
Dampen the inside of the chest band with water.
Damaged transmitter. Change the chest band.
Data on the display
incorrect or unreliable with
equipment running
Equipment next to source of radio interference (e.g.
electrical domestic appliances).
Move the equipment to another place or move the domestic
appliances.
To Next Page
Loading...
