Technogym Synchro Forma - Easily solved problems

SYNCHRO FORMA
19
Easily solved problems
Below is a list of problems that may arise during normal use of the equipment. If the described remedies do not solve the problem, contact the Technical Support
Service. f
Problem Cause Remedy
Equipment doesn’t switch on
Mains power failure
Check the power supply at the wall socket used by the equipment
by plugging in an appliance that denitely works.
Power supply cable damaged Contact the Technogym Technical Support Service.
Installation problems with the power supply cable Check the connection.
Burnt-out fuses
To replace the blown fuse with a spare contact Technogym
Technical Support Service.
The main switch is o. Switch on the main switch
Too noisy
Equipment not properly levelled. Check the position and level the adjustment feet.
Damaged bearings.
Contact the Technogym Technical Support Service.
Worn belt.
Contact the Technogym Technical Support Service.
Data incorrect or unreliable with
equipment running
Equipment next to source of radio interference (e.g. electrical
domestic appliances).
Move the equipment to another place or move the domestic
appliances.