Press “ MODE”
button (B1) to select to view alarm Time, “AL” shown on the
display
When viewing the Alarm Time, hold “MODE” button (B1) for 3 seconds to enter
Alarm Time setting. Press “+” (B4) or “-” (B5) button to adjust the alarm time.
Press “MODE” button (B1) to confirm the setting.
4.4 Snooze Alarm Function:
Press “ALARM” Button (B3) to activate or deactivate the alarm. If the alarm is on,
alarm icon "
" appears on th
e display.
Press “SNOOZE” (B2) button when alarm alerts. The alarm snoozes for 5 minutes,
then it alerts again. “
” flashes on the LCD during the snooze time. This process
can be repeated 7 times.
Except “SNOOZE” button, press any button to stop the alarm, or press “ALARM”
(B3) to stop snooze alarm.
4.5 12/24 Hour Display mode:
Press “12/24” (B4) button to select 12 or 24 hours mode.
5. Thermometer
Press “°C/°F” (B5) button to select Temperature in Celsius mode/ Fahrenheit
mode.
If the temperature is out of the measurable range, LL.L ( beyond the minimum
temperature) or HH.H (beyond the maximum temperature) will be shown on the
LCD.
6. Precautions
The clock loses its time information when the battery is removed.
Do not expose it to direct sunlight, heavy heat, cold, high humidity or wet areas
Never clean the device using abrasive or corrosive materials or products. Abrasive
cleaning agents may scratch plastic parts and corrode electronic circuits
English - 4
7. Specifications
To Next Page
Loading...
