19
English
6. Operation
6.1
Getting Started
Figure 6.1.8 Figure 6.1.9
➌
Satellite Scan
Through this function, the receiver searches for all the available channels and saves them in
memory.
▣ Auto Navigation <Figure 6.1.8>
1. Select the satellites you want to search by pressing the OK button on the remote.
You can select more satellites by pressing the button and OK button on the remote.
▪ Search Type: Select the type of channel search you want by presssing buttons on the remote.
▫ All: To search all the Free To Air and scrambled channels, TV & Radio channels.
▫ Free: To search Free To Air channels only.
▫ TV: To search TV channels only.
▪ Network Search: Select Network Search ON/OFF to find more transponders through NIT Search.
▪ Scan: Begin channel search of the selected satellite.
▪ Auto Navigation: Press RED button on the remote.
▪ Auto Navigation Blind Search: Press Green button on the remote to begin channel
search of all of the satellite in the satellite list.
2. Press OK under ‘SCAN’ to scan the selected satellites. <Figure 6.1.9>
To Next Page
Loading...