Technomate TM-F3 - Add Channels

41
English
➐
Add Channels
This submenu allows you to add channels.
1. Press on ‘Add Channels’. The following menu will be displayed. <Figure 6.3.8>
2. Press to change the parameter.
▪ Frequency: Select TP Frequency
▪ Channel Name: Press to display Keypad pop-up; Edit a channel’s name
▪ Channel Type: Select among TV / RADIO
▪ You can add specific channel of the transponder by setting its PID data
(Video, Audio and PCR).
▪ Video Type: Select the video type (MPEG1/2, H.264)
▪ Audio Type: Select the video type
(MPEG1/2, HE-AAC, Dolby Digital(AC3), MPEG4, AAC, Dolby Digital+(DD+))
6. Operation
6.3 Channels
Figure 6.3.8