Figure 4-119
4.10.5.1.3 Holiday
Holiday setup interface is shown as in Figure 4-120. Click Add new holiday button, you can input new
holiday information. See Figure 4-121. Here you can set holiday name, repeat mode and start/end time.
Note
When you enable Holiday settings and schedule setup at the same time, holiday setting has the
priority. If the selected day is a holiday, then system records as you set in holiday setting. If it is not
a holiday, system records as you set in Schedule interface. Please note
Please note, there is no year setup on the holiday setup. For example, if you set 30th Oct, 2012 as
a holiday, then the date of 30th Oct in each year will be set as a holiday.
To Next Page
Loading...