EasyManua.ls Logo

Techpro TRIDVR-ELE4ME - Specifications

Techpro TRIDVR-ELE4ME
198 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Support network remote real-time monitor, remote record search and remote PTZ control.
Alarm activation function
Several relay alarm outputs to realize alarm activation and on-site light control.
The alarm input port and output has the protection circuit to guarantee device safety.
Communication port
RS485 port can realize alarm input and PTZ control.
RS232 port can connect to keyboard to realize central control, and can also connect to PC COM to
upgrade system and realize maintenance, and matrix control.
Standard Ethernet port can realize network access function.
PTZ control
Support PTZ decoder via RS485.
Support various decode protocols to allow the PTZ to control the speed dome.
Intelligent operation
Mouse operation function
In the menu, support copy and paste setup function
UPnP
It is to establish the mapping relationship between the LAN and the WAN via the UPnP protocol.
Slight function differences may be found due to different series.
1.3 Specifications
TRIDVR-ELE4ME
TRIDVR-ELE8ME
TRIDVR-ELE16ME
Parameters
16-Ch
System Main Processor Industrial embedded micro controller
OS Embedded LINUX
Video
Parameters
Video Encode
Standard
H.264
Encode
Resolution
720P/D1/HD1/2CIF/CIF/QCIF
Video Frame
Rate
PAL:1~25f/sNTSC1~30f/s
Video Frame
Rate
1536Kbps-4096Kbps
For 720P: default setup is 2Mbpsmax supports 4Mbps
Bit Stream Type Video stream/composite stream
Dual-Stream Support
Audio
Parameters
Encode
Standard
G.711A/G.711U/PCM
Audio Sampling
Rate
8KHz16Bit
Audio Bit Rate 64Kbps
Video Port Analog Video
Input
16-channel BNC
port
8-Ch
4-Ch
8-channel BNC
port
4-channel BNC
port

Table of Contents